# Debt-to-Equity Ratio: Formula, a Worked Example, and What Your Pipeline Adds

https://salesbond.app/blog/debt-to-equity-ratio-sales-owner-growth-financing-open-pipeline-crm/
Published: 2026-11-13 · Updated: 2026-11-20

The debt-to-equity ratio (D/E) is a company’s total liabilities divided by its owners’ equity. A ratio of 1.4 means the business carries $1.40 of other people’s money for every $1.00 of its own. The higher the number, the more of the company runs on borrowed funds, and the more it depends on revenue arriving on schedule to service them.

For an owner about to borrow for growth (four new reps, a bigger stock position), the ratio answers one question well: how much of the balance sheet is borrowed today. When customers will pay is a separate question. That part lives in your CRM, and this guide puts the two side by side.

Nothing below is financial advice. Whether to borrow is a call for you, your accountant and your lender, the aim here is to read the number correctly.

## The debt-to-equity ratio formula and where the inputs come from

Both inputs sit on one report, the balance sheet, on one date.

**Debt-to-equity ratio = total liabilities / total equity**

Patriot Software’s small-business guide writes the formula as total debt divided by total equity and builds total debt by adding all liabilities together: loans, accounts payable to vendors, and fixed payments ( [Patriot Software: debt-to-equity ratio](https://www.patriotsoftware.com/blog/accounting/debt-to-equity-ratio/)). Equity is assets minus liabilities, the same guide’s second formula. The result can be written three ways that mean the same thing: 1.4, 1.4:1 or 140%.

Liabilities include more than bank debt. Customer deposits, deferred revenue on prepaid contracts, and commissions you owe but haven’t paid all count, which we covered in [liabilities for a sales owner](https://salesbond.app/blog/liabilities-sales-owner-deferred-revenue-deposits-commissions-owed-crm/). So in this version of the formula a quarter with heavy prepayments pushes D/E up without a single new loan.

Equity is whatever is left after liabilities are subtracted from assets (the [accounting equation](https://salesbond.app/blog/accounting-equation-sales-owner-closed-won-assets-liabilities-equity-crm/) rearranged). It grows with retained profit and shrinks with losses. Keep that in mind for the example below. A hiring plan financed by a loan usually loses money for a few months before it earns any.

Lenders and analysts don’t all count the same lines. CFI’s guide to the D/E formula uses a narrower total debt: drawn credit lines, notes payable, long-term debt and capital leases go in, while accounts payable, accrued expenses and deferred revenue stay out ( [CFI: debt to equity ratio formula](https://corporatefinanceinstitute.com/resources/commercial-lending/debt-to-equity-ratio-formula/)). Ask your lender which version sits in the loan covenant before you compare your number with theirs.

## A worked example: a $300,000 loan to hire four reps

Say a B2B distributor with eight salespeople wants to add four more and carry extra inventory for the accounts they’ll open. The figures are an illustrative example, built so the arithmetic is easy to follow: $900,000 of assets, $400,000 of liabilities, and a $300,000 term loan.

| Balance sheet line | Before the loan | Day the loan lands | 12 months later, slow ramp | 12 months later, plan met |
| --- | --- | --- | --- | --- |
| Total assets | $900,000 | $1,200,000 | $1,050,000 | $1,270,000 |
| Total liabilities | $400,000 | $700,000 | $650,000 | $650,000 |
| Total equity | $500,000 | $500,000 | $400,000 | $620,000 |
| D/E ratio | 0.80 | 1.40 | 1.63 | 1.05 |

Walk through it column by column.

1. Before the loan, liabilities of $400,000 (a credit line, vendor payables, customer deposits, accrued commissions) against $500,000 of equity give 0.80.
2. The $300,000 term loan adds the same amount to cash and to liabilities. Equity doesn’t move. The ratio jumps to 1.40 overnight.
3. In the slow-ramp year the company repays $50,000 of principal and books a $100,000 net loss while the new reps build pipeline. Liabilities fall to $650,000 and equity falls to $400,000. D/E climbs to 1.63 even though nobody borrowed another dollar.
4. In the plan-met year the same $50,000 is repaid and the company retains $120,000 of profit. Equity reaches $620,000 and the ratio comes down to 1.05.

Same loan, same repayment schedule, and a gap of 0.58 between the two outcomes. Everything in that gap came from how fast the new reps turned into paid invoices.

## What is a good debt-to-equity ratio?

Patriot Software’s guide (read in November 2026) says lenders generally see a D/E below 1.0 as good and above 2.0 as bad, and warns that the ratio doesn’t account for industry, so a good figure in construction may be a bad one in retail ( [Patriot Software](https://www.patriotsoftware.com/blog/accounting/debt-to-equity-ratio/)). By that yardstick 0.5 is comfortably good: fifty cents of liabilities per dollar of equity. A 1.5 means $1.50 of liabilities for every $1.00 of equity, which sits between the two lines, and it’s exactly where the guide’s own example lands after a $10,000 loan is added to $5,000 of debt and $10,000 of equity.

How would a banker read the distributor’s 1.40, then? It’s under the 2.0 line with room to spare for one bad year, and the next question will be which way it’s moving.

Lenders often add a second test, the [debt service coverage ratio](https://salesbond.app/blog/debt-service-coverage-ratio-dscr-sales-owner-what-a-lender-checks-and-how-pipeline-numbers-feed-it/), which compares income with loan payments.

Industry matters more in practice than any single threshold. A business that owns trucks, machinery or a warehouse usually finances those assets with long-term debt and lives with a higher ratio for years. A services firm with few assets and steady retainers may sit far below 1.0 and still feel a cash squeeze every time a large client pays late.

A very low ratio has a reading too. It can mean the the owners funded everything themselves and growth moves only as fast as retained profit allows. Whether that’s caution or a missed opportunity is a question for you and your accountant.

Below zero is its own case. Patriot Software’s guide explains that a negative D/E means negative equity (liabilities larger than assets), and that lenders and investors typically treat it as risky.

We don’t recommend judging a growth loan by the “keep it under 2” line alone, because the ratio is a snapshot of one date and carries no information about timing. Two companies can both show 1.40. If one collects cash 30 days after a deal closes and the other waits 120 days, they’re carrying very different loads, and the balance sheet won’t show you which is which.

## Can the pipeline carry the payments?

Usually not in the first months. Loan payments start next month, and revenue from a new rep starts much later.

Take the distributor again (still an illustrative example). The four reps start on January 1. Their first real opportunities get created about 30 days in. The company’s median sales cycle is 75 days, and customers pay on net-45 terms. That’s 30 + 75 + 45 = 150 days, so the first cash from the new hires arrives around the start of June.

![Winding road timeline from January to June: loan and pay go out monthly, the first deals come at day 30 and 105, the first paid invoice at day 150.](https://salesbond.app/wp-content/uploads/2026/11/debt-to-equity-ratio-sales-owner-growth-financing-open-pipel-2.png)

Meanwhile the money goes out monthly. Say the loan payment is $9,500 and each rep’s base pay is $6,000.

| Cash out before the first cash in | Per month | Five months |
| --- | --- | --- |
| Loan payments | $9,500 | $47,500 |
| Base pay for four reps | $24,000 | $120,000 |
| Total | $33,500 | $167,500 |

More than half of the $300,000 is spent before the first invoice from a new rep is paid, and inventory hasn’t been counted yet.

What can the pipeline promise here? An open deal is a possibility with a close date somebody typed in. It shows where revenue might come from and roughly when. It can’t promise the close date holds, that the deal closes at the amount shown, or that the customer pays on day 45 instead of day 80. A sales plan built on the open pipeline should carry those three discounts openly, and we walk through the mechanics in [cash flow forecast from the CRM pipeline](https://salesbond.app/blog/cash-flow-forecast-crm-pipeline/).

## CRM numbers to put next to D/E

Before the meeting with the bank, pull four figures from the CRM and print them on the same page as the ratio.

| CRM number | How to get it | What it adds to D/E |
| --- | --- | --- |
| Forecast accuracy | Forecast at the start of each month versus closed-won at the end, last six months | How much of the planned revenue to believe |
| Sales cycle | Median days from deal created to deal won, split by new and existing customers | When a new hire’s first deals can close |
| Open receivables on won deals | Won deals with an unpaid invoice, by age (needs a payment status field or an invoicing integration) | How long cash trails the win |
| Ramp time | Days from a rep’s start date to their first won deal, for your last few hires | Whether the 30-day assumption above is honest |

Forecast accuracy does the heaviest lifting. Suppose the repayment plan assumes the new reps add $80,000 a month once ramped. If the team’s forecast has landed at 75% of the called number over the last six months, plan on $60,000 and see whether the payments still fit. Our guide to [sales forecast accuracy for small teams](https://salesbond.app/blog/sales-forecast-accuracy-small-teams/) shows how to calculate it without a forecasting tool.

Use the median for sales cycle. One deal that sat open for 400 days drags the average up and tells you little about a typical deal.

Receivables are where the CRM usually runs out. Many teams mark a deal won and never record the payment, so the age of unpaid invoices has to come from accounting. If that’s your setup ask for the receivables aging report and match it against last quarter’s won deals. Payment terms and open deals together are the subject of [working capital for a sales owner](https://salesbond.app/blog/working-capital-sales-owner-payment-terms-and-open-deals-crm/).

All four numbers are only as good as the data under them. A pipeline full of deals with pushed close dates and no next activity will flatter every one of these figures. SalesBond’s free CRM audit checks that side: it looks at the last 30 days of your connected CRM and sends a PDF report with money at risk, deal health, the pipeline bottleneck and what to fix, then a second PDF seven days later showing what changed. D/E and the other balance sheet figures stay in your accounting system; SalesBond doesn’t calculate them. What it gives you is a read on how far to trust the pipeline you’re about to borrow against. [Check your CRM with SalesBond](https://salesbond.app/).

## Where owners misread the ratio

Go back to the slow-ramp column. The ratio read 1.40 on the day the loan landed and 1.63 a year later, with no new borrowing in between. An owner who checked D/E once, at signing, and filed it away would have missed the whole move (and so would anyone reading last year’s balance sheet). If you borrow for growth, recalculate it every quarter. Which way is it heading?

Comparing against a company in another industry comes second. Your neighbor’s manufacturing business at 2.2 and your agency at 0.9 tell you nothing about each other.

Sales-led companies get caught by deposits and deferred revenue. They’re liabilities. A strong quarter of annual prepayments raises the total-liabilities version of the ratio, and an owner who doesnt expect that can walk into a covenant conversation unprepared. Your [balance sheet](https://salesbond.app/blog/balance-sheet-sales-owner-what-your-crm-feeds-and-what-it-cannot-show/) lists these lines separately, so you can check how much of the total is bank debt and how much is work you’ve been paid for and still owe the customer.

Then there’s counting pipeline as if it were equity. Open deals appear nowhere on the balance sheet. A $2 million pipeline doesn’t lower D/E by a cent until deals close, get invoiced, and turn into profit that stays in the company.

The ratio also gets read without the payment schedule beside it. D/E measures how much you owe relative to what you own. Whether you can make the March payment depends on March cash, which brings you back to sales cycle and receivables.

So when the ratio comes up in your next conversation with the bank or your accountant, bring the second page with six months of forecast accuracy, the median sales cycle, receivables by age and ramp time for your last hires. Which of the four would change your answer about the loan if it came in 20% worse than you assume?
