# HubSpot business card scanner: where it is, what it saves, and a 48-hour routine for event leads

https://salesbond.app/blog/hubspot-business-card-scanner-mobile-app-event-leads/
Published: 2026-11-16 · Updated: 2026-11-16

Yes. HubSpot has a free business card scanner in its mobile app: tap the create (+) icon, then **Scan card or QR code**, photograph the card, confirm the properties and save it as a contact.

HubSpot’s help article on mobile imports says the scanner runs on Android and on iPhones with iOS 16 or higher, and that it is not supported on iPads ( [HubSpot: import contacts on the HubSpot mobile app](https://knowledge.hubspot.com/import-and-export/import-contacts-on-the-hubspot-mobile-app), as of November 2026). HubSpot’s product page calls the scanner “free forever” and says you can use it without HubSpot’s CRM tools or other HubSpot software ( [HubSpot: Free Business Card Scanner App](https://www.hubspot.com/products/business-card-scanner-app), as of November 2026).

## How to scan a business card in the HubSpot mobile app

The steps below follow HubSpot’s help article as it read in November 2026. Button names can move between app versions, so if your screen differs, trust the help article over this list.

1. Open the HubSpot business card scanner app, which is simply the HubSpot mobile app on your phone.
2. In the top right, tap the create icon (the plus).
3. On iOS, tap **Scan card or QR code**. On Android, tap **Scan card or QR code**, then **Scan card**.
4. Grant camera access if the app asks for it.
5. Take a photo of the card. HubSpot asks you to make sure “there’s adequate lighting and there isn’t any severe glare or blur”, and booth spotlights on a glossy card produce exactly that glare. Step away from the lights if you can.
6. Drag the four points to the corners of the card.
7. Tap the properties that were read correctly, edit the ones that weren’t, and tap **Save** in the top right.

The app opens the new record with “Contact saved”. For the next card tap **Scan another card**, and repeat (the help article doesn’t describe a batch mode, so forty cards means forty passes through the camera).

Check the phones before the show. The scanner article asks for iOS 16, while HubSpot’s install article says the app itself needs iOS 17 or later on iPhone (or Android 11 and above), so in practice an iPhone below iOS 17 falls short of the app’s own requirement. We covered the install side in [the HubSpot mobile app routine for reps and the manager check](https://salesbond.app/blog/hubspot-mobile-app-rep-capture-manager-check/). Run one test scan on your own card with the phone you’ll carry at the booth. A rep who finds out on the show floor that thier phone can’t do it loses a day of cards.

## What lands on the contact record

HubSpot’s help article lists eight properties a scanned card can fill, each “if available”: Email, First name, Last name, Job title, Phone number, Website, Street address and Postal code.

The same article says every scanned contact also gets two source values. **Original Traffic Source Drill-Down 1** is set to MOBILE_IOS or MOBILE_ANDROID, and **Original Traffic Source Drill-Down 2** is set to `business-card-scanner`. For a manager, that second value matters most. A month after the show it’s the one dependable filter that pulls every scanned contact into a single list.

A common tip for event leads says to edit the contact’s source by hand so it names the event. We’d leave Original Traffic Source alone on a scanned contact. HubSpot’s article on source properties says the drill-down values “are automatically set by HubSpot and cannot be updated manually”, and that if you change a record’s traffic source, “the drill-down properties will be cleared” ( [HubSpot: understand traffic source properties](https://knowledge.hubspot.com/properties/understand-traffic-source-properties), as of November 2026). Edit the source and the `business-card-scanner` marker disappears. Put the event name in a contact property of your own instead; a dropdown called Event with one option per show is enough.

## What the HubSpot scanner doesn’t fill in

HubSpot’s business card scanner doesn’t fill in the company name, contact owner, lifecycle stage or custom properties. None of them appear in the help article’s list for scanned cards, and neither does the booth conversation, so each one is a field someone has to fill by hand.

Start with the company. HubSpot’s product page mentions “automatic contact-company association” once the contact exists. The help center explains how it works: with the setting on, HubSpot matches the domain in the contact’s Email to a company’s Company domain name, and if no such company exists it creates one and fills it from HubSpot’s database ( [HubSpot: automatically create and associate companies with contacts](https://knowledge.hubspot.com/object-settings/automatically-create-and-associate-companies-with-contacts), as of November 2026). To turn it on, open Settings, go to Objects under Data Management, choose Companies and tick **Create and associate companies with contacts** in the Automation section.

Cards test that setting in two ways. A card with a gmail.com address can still get a company, but only through the Website, because for freemail addresses HubSpot checks the contact’s Website URL. And the company comes from the email domain, which may belong to the parent group while the card names a local subsidiary. One more caution from the same article: if you run the HubSpot-Salesforce integration, HubSpot doesn’t recommend turning the setting on.

What about duplicates? HubSpot deduplicates contacts by email address ( [HubSpot: deduplication of records](https://knowledge.hubspot.com/records/deduplication-of-records), as of November 2026). The scanner section of the mobile article doesn’t cover a card whose email already belongs to a contact, and a card with no email gives HubSpot nothing to match. So search the email or the company in the app before you tap Save. If the person is already there, add the new phone number and the booth note to that record and skip the scan.

Then the owner and the next step. The help article doesn’t say who becomes the contact owner of a scanned card, and the person staffing the booth often isn’t the rep who works that account. Open the Contact owner property on the saved record and reassign it while the card is still in your hand. Then create a task. HubSpot’s task article lists the fields that matter here: an “Assigned to” user, a due date and the associated record ( [HubSpot: create tasks](https://knowledge.hubspot.com/tasks/create-tasks), as of November 2026).

The booth conversation is the last gap. “Asked about pricing for 12 seats, call after the 15th” lives in the rep’s head and on the back of the card. Typing it into a note now takes less time than hunting for the card next week.

## After the event: forty cards and 48 hours

A worked example, with invented numbers. Say a four-rep team comes back from a two-day trade show with 40 cards. Within 48 hours of the show closing, the manager wants every card turned into a contact with an owner and a dated task, or thrown in the bin. Why 48 hours? The prospect met dozens of vendors, and by the following week your rep is one more card in their own pile.

![Winding road with five stops: 40 cards, search first, 34 scanned, company check, 34 contacts with owner and task](https://salesbond.app/wp-content/uploads/2026/11/hubspot-business-card-scanner-mobile-app-event-leads-2.png)

On the evening of day two, the reps search before they scan. Six of the 40 people are already in HubSpot. Those six get a note and an updated phone number on the existing record and their cards never touch the scanner. That leaves 34.

The 34 scans fit into one train ride. Each rep fixes the name fields, types the booth note and picks the show in the Event property before moving on.

Next morning, coffee in hand, the manager opens the list of scanned contacts and goes straight to the company column. What’s missing? Twenty-nine cards had a work email, so automatic association gave them a company. Five had a freemail address. Three of those carried a website on the card and matched through it, and the manager picks a company by hand for the last two, which takes four minutes.

Ownership comes next. Nine of the 34 belong to accounts another rep already works, so the manager reassigns those nine and forwards the booth notes. By the end of the first day after the show, all 34 contacts have an owner and a task due inside the 48 hours. Spread across four reps, that’s eight or nine calls each, a normal morning.

And the team that skips all this? A month later it has forty records created on the same date, most without a company or a task, and six of them duplicates of people an account manager already talks to.

## Find every scanned contact a month later

Build the list once, before the show. On the contacts index page, filter on Original Traffic Source Drill-Down 2 with the value `business-card-scanner`, add a create date filter for the show week, and save it as a view. HubSpot’s help article on saved views says a view can be shared with everyone in the account or with selected teams, and that creating one requires Create CRM views permissions ( [HubSpot: create and manage saved views](https://knowledge.hubspot.com/records/create-and-manage-saved-views), as of November 2026).

Then add columns. Contact owner, the associated company and last activity date are the three that earn their place (anything more and you’ll stop reading the view after week one), and sorting by any of them pushes the gaps to the top. Come Friday, the manager asks one thing. How many scanned contacts still have no owner, no company or no activity since the scan?

That Friday question is the same check we built SalesBond around. SalesBond is a sales management layer that works on top of the CRM a team already uses, HubSpot included. Once a scanned contact turns into a deal, Deal Health checks the deal against more than 20 rules and shows each violation with what to do about it. The free CRM audit reads the last 30 days of the connected CRM and sends a PDF report, then a second PDF seven days later with what changed. If the show was three weeks ago, that window covers it. [Check your CRM with SalesBond](https://salesbond.app/).

## When import beats the scanner

The scanner takes one card per pass, and the help article describes no way to scan a stack in bulk. For some event leads another route is faster, and HubSpot’s mobile import article describes two of them next to the scanner.

- QR codes first. The same **Scan card or QR code** button reads QR codes in the vCard format. On both platforms it fills Email, First name, Last name, Job title, Phone number and Website; on iOS it also returns Street address and Postal code. These contacts get `qr-code-scanner` in Drill-Down 2, so add that value to your saved view if badges at the show carry QR codes.
- Did a rep already save people to the phone’s address book? **Import from device contacts** brings them in with Lifecycle stage defaulting to Lead. HubSpot notes that device contacts with no email address “cannot be deduplicated or associated with companies”.
- When the organizer hands you an attendee or lead-retrieval export, import the file on desktop ( [HubSpot: import records](https://knowledge.hubspot.com/import-and-export/import-objects), as of November 2026) and include the Email column. HubSpot’s deduplication article says an imported row whose email matches an existing contact updates that contact, while a file without Email or another unique identifier creates a new contact for every row.

Files don’t get a marker. HubSpot documents `business-card-scanner` only for scans, so add an Event column to the file and fill it with the show name before you import. If last year’s show already left duplicates behind, the weekly cleanup is in [HubSpot’s Data Quality Command Center and duplicate management](https://salesbond.app/blog/hubspot-data-quality-command-center-duplicates/). To see how another CRM handles the same job, read our [48-hour routine for the Pipedrive business card scanner](https://salesbond.app/blog/pipedrive-business-card-scanner-event-leads/). Before your next show, save the view and run the test scan this week.
